In Figure 7c, some tiny particles still remain on the surface, du

In Figure 7c, some tiny particles still remain on the surface, due to smaller space between the electrodes. Figure 7 The cleaning experiments of micro brush. The

surface of (a) silicon wafer, (b) the electrode with gap of 100 μm, and (c) the electrode with gap of 2 μm. Conclusions In summary, we have demonstrated that micro brushes based on CNT arrays were successfully fabricated. Firstly, the preparation of CNT arrays by a CVD method in AAO template was studied. The results show that the quality and degree of graphitization Selleckchem APO866 of CNT arrays can be improved significantly through a heat preservation pretreatment method. Secondly, three types of micro brushes were obtained on silicon, glass, and polyimide substrates with the assistance of epoxy resin, respectively. The hole spacing of the micro brushes is highly uniform owing to the regularly periodic pore structure of AAO template. The CNT arrays were firmly grafted on the substrates as bristles.

The cleaning experimental results show that the particles on the surface of silicon wafer and between the electrodes can almost be swept DAPT manufacturer away. The results expand the cleaning practicality of micro brushes in microelectronics manufacture field. Acknowledgements This work was supported by the National High-Tech R & D Program of China (863 program, 2011AA050504), National Natural Science Foundation of China (61376003), Program for New Century Excellent Talents in University (NCET-12-0356), Shanghai Science and Technology Grant (12JC1405700 and 12nm0503800), Shanghai Natural Science Foundation (13ZR1456600), Shanghai Pujiang Program (11PJD011), the Program for Professor of Special Appointment

(Eastern Scholar) at Shanghai Institutions of Higher Learning, and Medical-Engineering Crossover Fund (YG2012MS40) of Shanghai Jiao Tong University, and the Foundation for SMC Excellent Young Teacher in Shanghai Jiao Tong University. We also acknowledge the analysis support from the Instrumental Analysis Center of Shanghai Jiao Tong University. References 1. learn more Iijima Thalidomide S: Helical microtubules of graphitic carbon. Nature 1991, 354:56–58.CrossRef 2. Iijima S, Ichihashi T: Single-shell carbon nanotubes of 1-nm diameter. Nature 1993, 363:603–605.CrossRef 3. Chen C, Hou Z, Liu X: Fabrication and characterization of the performance of multi-channel carbon-nanotube field-effect transistors. Phys Lett A 2007, 366:474–479.CrossRef 4. Tang Y, Li X, Li J: Experimental evidence for the formation mechanism of metallic catalyst-free carbon nanotubes. Nano-Micro Lett 2010, 2:18–21.CrossRef 5. Bahr J, Tour J: Covalent chemistry of single-wall carbon nanotubes. J Mater Chem 2002, 12:1952–1958.CrossRef 6. Zhao B, Wang J, Chen D: Electrical and field emission properties of multiwalled carbon nanotube/epoxy composites. Mater Sci Technol 2009, 25:587–590.CrossRef 7. Tasis D, Tagmatarchis N, Bianco A: Chemistry of carbon nanotubes. Chem Rev 2006, 106:1105–1136.CrossRef 8.

Comments are closed.