In order to further study these results, we analyze the positions of the extrema of the magnetoresistivity oscillations in B as well as the heights of the QH steps. Although the steps in the converted Hall conductivity ρ xy are not well quantized in units of 4e 2/h, they allow us to selleck screening library determine the Landau-level filling factor as indicated in the inset of Figure 1. The carrier density

of our device is calculated to be 9.4 × 1016 m−2 following the procedure described in [47, 48]. Figure 1 Longitudinal and Hall resistivity ρ xx ( B ) and ρ xy ( B ) at T = 0.28 K. The inset shows the converted ρ xy (in units of 4e 2/h ) and ρ xx as a function of B. We now turn to our main experimental finding. Figure 2 shows the curves of ρ xx (B) and ρ xy (B) as a function of magnetic field at various temperatures ML323 order T. An approximately T-independent point in the measured ρ xx at B c = 3.1 T is observed. In the vicinity of B c, for B < B c, the sample behaves as a weak insulator in the sense that ρ xx decreases Selleckchem ATM/ATR inhibitor with increasing T. For B > B c, ρ xx increases with increasing T, characteristic of a quantum Hall state. At B c, the corresponding Landau-level filling factor is about 125 which is much bigger than 1. Therefore, we have observed evidence for a direct insulator-quantum Hall transition in our multi-layer graphene. The crossing points for B > 5.43 T can be ascribed to approximately

T-independent points near half filling factors in the conventional Shubnikov-de Haas (SdH) model [17]. Figure 2 Longitudinal and Hall resistivity ρ xx ( B ) and ρ xy ( B ) at various temperatures T . An approximately T-independent point in ρ xx is indicated by a crossing field B c. By analyzing the amplitudes of the observed SdH oscillations at various magnetic fields and temperatures, we are able to determine the effective mass m * of our device which is an important physical quantity. The amplitudes of the SdH oscillations ρ xx is given by [49]: where

, ρ 0, k B, h, and e are a constant, the Boltzmann constant, Plank’s constant, and electron charge, respectively. When , we have where C 1 is a constant. Figure 3 shows the amplitudes of the SdH oscillations at a fixed magnetic field of 5.437 T. We can see that the experimental data can be well fitted to Equation 2. The Dynein measured effective mass ranges from 0.06m 0 to 0.07m 0 where m 0 is the rest mass of an electron. Interestingly, the measured effective mass is quite close to that in GaAs (0.067m 0). Figure 3 Amplitudes of the observed oscillations Δ ρ xx at B = 5.437 T at different temperatures. The curve corresponds to the best fit to Equation 2. In our system, for the direct I-QH transition near the crossing field, ρ xx is close to ρ xy . In this case, the classical Drude mobility is approximately the inverse of the crossing field 1/B c. Therefore, the onset of Landau quantization is expected to take place near B c[50].